The Kansas Department of Health and Environment (KDHE) is responsible for administering the state’s hazardous waste program, which is primarily authorized under the Resource Conservation and Recovery Act (RCRA) at the federal level and then supplemented by state-specific regulations. When a generator of hazardous waste in Kansas produces a quantity of hazardous waste that exceeds the threshold for a small quantity generator (SQG) but does not meet the criteria for a large quantity generator (LQG), they are classified as a very small quantity generator (VSQG). VSQGs have the least stringent regulatory requirements. Specifically, under Kansas regulations that mirror federal RCRA requirements, a VSQG is a generator who generates no more than 100 kilograms (approximately 220 pounds) of hazardous waste per month, or no more than 1 kilogram (approximately 2.2 pounds) of acute hazardous waste per month. Furthermore, a VSQG must not accumulate more than 1,000 kilograms (approximately 2,200 pounds) of hazardous waste at any time. The management standards for VSQGs are less rigorous than those for SQGs and LQGs, often allowing for more flexibility in accumulation and disposal methods, provided the waste is managed in a manner that does not pose a threat to human health or the environment. This flexibility is a key distinction in the tiered generator system established by RCRA and adopted by Kansas.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory agency for hazardous waste management in Kansas, operating under authority granted by the Kansas Environmental Management Services Act (K.S.A. Chapter 65, Article 34). This act, along with regulations promulgated by KDHE (Kansas Administrative Regulations – K.A.R. Article 28, Chapter 44), establishes the framework for identifying, managing, and disposing of hazardous waste. Generators of hazardous waste are classified based on the quantity of waste they produce per month. Very Small Quantity Generators (VSQGs) produce 100 kilograms (kg) or less of hazardous waste per month, or 1 kg or less of acute hazardous waste per month. Small Quantity Generators (SQGs) produce between 100 kg and 1,000 kg of hazardous waste per month. Large Quantity Generators (LQGs) produce 1,000 kg or more of hazardous waste per month. These classifications dictate the specific requirements for storage, record-keeping, personnel training, and emergency preparedness. For instance, SQGs have less stringent storage time limits and training requirements compared to LQGs, while VSQGs have significantly reduced regulatory burdens. The core principle is that the stringency of regulation increases with the volume and potential hazard of the waste generated. Understanding these thresholds is fundamental to compliance with Kansas hazardous waste regulations.

The Kansas Department of Health and Environment (KDHE) has specific regulations concerning the management of hazardous waste. When a generator of hazardous waste in Kansas determines that a waste is hazardous, they must comply with the generator requirements outlined in the Kansas Administrative Regulations (KARS). Specifically, KARS 28-31-102(a) states that any person who generates a hazardous waste must comply with the applicable requirements of KARS 28-31-100 through 28-31-220, and with the applicable requirements of the Resource Conservation and Recovery Act (RCRA) of 1976, as amended, and regulations promulgated thereunder by the Administrator of the U.S. Environmental Protection Agency. This includes obtaining an EPA identification number, complying with accumulation time limits, proper container management, and manifesting shipments. The question asks about the initial regulatory obligation upon determining a waste is hazardous. The correct action is to comply with the relevant Kansas regulations for hazardous waste generators, which is the overarching legal framework for such activities within the state. Other options represent potential subsequent actions or incorrect interpretations of the initial obligation. Obtaining an EPA ID number is a requirement for generators, but it is part of the broader compliance obligation. Notifying the local fire department is a general safety practice but not the primary regulatory trigger for hazardous waste management. Conducting a treatability study is a specific technical evaluation that may be required or beneficial, but it is not the initial mandatory step upon waste characterization.

The Kansas Department of Health and Environment (KDHE) oversees hazardous waste management under the Resource Conservation and Recovery Act (RCRA) and its state-specific implementations. Generators of hazardous waste are classified based on the quantity of hazardous waste they produce per month. This classification dictates the specific management standards they must follow. A very small quantity generator (VSQG) produces no more than 100 kilograms (approximately 220 pounds) of hazardous waste per month, and no more than 1 kilogram of acutely hazardous waste. A small quantity generator (SQG) produces between 100 and 1,000 kilograms of hazardous waste per month. A large quantity generator (LQG) produces 1,000 kilograms or more of hazardous waste per month. The scenario describes a facility in Kansas that generates 850 kilograms of hazardous waste in January and 1,150 kilograms in February. Since the generation rate fluctuates, the generator status is determined by the *highest* amount generated in any single month during a calendar quarter, or by averaging over the quarter if it’s consistent. In this case, February’s generation of 1,150 kilograms exceeds the 1,000-kilogram threshold for a large quantity generator. Therefore, for the entire calendar quarter that includes January and February, the facility must manage its hazardous waste as a large quantity generator. This requires adherence to the most stringent management standards, including detailed record-keeping, specific storage time limits, emergency preparedness plans, and biennial reporting. The key principle is that a generator must operate under the most stringent requirements applicable to any month within a given quarter to ensure consistent and robust hazardous waste management practices.

The Kansas Department of Health and Environment (KDHE) implements the Hazardous Waste Management Act, which aligns with the federal Resource Conservation and Recovery Act (RCRA). Generators of hazardous waste are classified based on the quantity of hazardous waste produced per month. Very Small Quantity Generators (VSQGs) produce 100 kilograms (kg) or less per month. Small Quantity Generators (SQGs) produce between 100 kg and 1,000 kg per month. Large Quantity Generators (LQGs) produce 1,000 kg or more per month. The question describes a facility that generates 150 kg of hazardous waste in January and 95 kg in February. To determine the generator status, the total quantity generated over a single calendar month is considered. Since the facility generated 150 kg in January, it falls within the SQG category for that month. The subsequent month’s generation of 95 kg does not retroactively change the classification for January. Therefore, the facility is classified as a Small Quantity Generator based on its January generation. The key concept here is the monthly generation threshold for determining hazardous waste generator status under Kansas regulations, which are largely based on federal RCRA definitions. Understanding these thresholds is crucial for compliance with manifesting, storage, and reporting requirements.

The Kansas Department of Health and Environment (KDHE) implements the Hazardous Waste Management Act, which aligns with the Resource Conservation and Recovery Act (RCRA) at the federal level. A key aspect of this regulation involves the management of hazardous waste from its generation to its final disposal, often referred to as “cradle-to-grave” management. This includes specific requirements for generators, transporters, and treatment, storage, and disposal facilities (TSDFs). For a generator to be exempt from certain stringent requirements, such as obtaining a RCRA Part B permit for storage, they must adhere to specific accumulation time limits and quantity thresholds. In Kansas, a small quantity generator (SQG) is generally defined as a facility that generates between 100 and 1,000 kilograms of hazardous waste per month. These generators have a limit of storing hazardous waste on-site for no more than 180 days without a permit. However, if the waste needs to be transported more than 200 miles, this accumulation period can be extended to 270 days. This extension is a conditional allowance to manage logistics for off-site disposal when distances are significant. Therefore, the 270-day period is applicable under specific transportation circumstances for SQGs in Kansas.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body overseeing hazardous waste management in Kansas. Under the Resource Conservation and Recovery Act (RCRA) and its state-authorized program, KDHE establishes standards for generators, transporters, and treatment, storage, and disposal facilities (TSDFs). Generators are classified based on the quantity of hazardous waste produced per month. Small Quantity Generators (SQGs) produce between 100 and 1,000 kilograms of hazardous waste per month, or less than 1 kilogram of acute hazardous waste per month. Large Quantity Generators (LQGs) produce over 1,000 kilograms of hazardous waste per month, or more than 1 kilogram of acute hazardous waste per month. Very Small Quantity Generators (VSQGs) produce 100 kilograms or less of hazardous waste per month. Each generator category has distinct regulatory requirements regarding waste accumulation, record-keeping, personnel training, emergency preparedness, and reporting. The scenario presented involves a facility in Kansas that generates 850 kilograms of hazardous waste in a given month. This quantity falls within the threshold for a Small Quantity Generator (SQG) under both federal RCRA regulations and Kansas’s hazardous waste regulations, which largely mirror federal requirements. Therefore, the facility must comply with the specific management standards applicable to SQGs in Kansas, which are less stringent than those for LQGs but more stringent than those for VSQGs.

The Kansas Department of Health and Environment (KDHE) administers the state’s hazardous waste program, which is authorized by the U.S. Environmental Protection Agency (EPA) under the Resource Conservation and Recovery Act (RCRA). Specifically, Kansas Administrative Regulation (KAR) 28-31-1 et seq. outlines the requirements for hazardous waste management. This regulation defines hazardous waste based on characteristics (ignitability, corrosivity, reactivity, toxicity) and listed wastes. Generators of hazardous waste are subject to specific requirements depending on the quantity of hazardous waste they produce per month. Small Quantity Generators (SQGs) are defined as those who generate between 100 and 1,000 kilograms of hazardous waste per month. Large Quantity Generators (LQGs) generate over 1,000 kilograms of hazardous waste per month. Conditionally Exempt Small Quantity Generators (CESQGs) generate 100 kilograms or less of hazardous waste per month. Each category has distinct management, storage, record-keeping, and reporting obligations. The question pertains to the classification of a generator based on monthly waste generation, which is a fundamental aspect of hazardous waste regulation in Kansas, directly impacting compliance responsibilities. Understanding these thresholds is crucial for proper waste management and regulatory adherence.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body overseeing hazardous waste management in Kansas. Under the Kansas Hazardous Waste Management Act (K.S.A. 65-3430 et seq.) and its corresponding regulations (K.A.R. 28-31-1 et seq.), facilities that generate, treat, store, or dispose of hazardous waste are subject to permitting and operational requirements. The Act defines hazardous waste based on characteristics such as ignitability, corrosivity, reactivity, and toxicity, as well as through specific listings. The core principle of the Act is to protect public health and the environment from the adverse effects of hazardous waste. This involves a cradle-to-grave management system, ensuring that hazardous waste is tracked from its point of generation to its final disposition. Enforcement actions, including penalties for non-compliance, are a critical component of the regulatory framework. The KDHE has the authority to conduct inspections, issue notices of violation, and impose fines or other corrective measures to ensure adherence to the law. The specific penalties are often determined by the severity and nature of the violation, considering factors such as the volume of waste involved, the potential for environmental harm, and the violator’s compliance history.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body overseeing hazardous waste management in Kansas, implementing the federal Resource Conservation and Recovery Act (RCRA) and state-specific regulations. A facility that generates hazardous waste is subject to various requirements based on its generation rate. The threshold for being classified as a large quantity generator (LQG) under RCRA, and thus under Kansas regulations which largely mirror federal rules, is generating 1,000 kilograms (kg) or more of hazardous waste per month, or more than 1 kg of acute hazardous waste per month. Small quantity generators (SQGs) generate between 100 kg and 1,000 kg of hazardous waste per month. Conditionally exempt small quantity generators (CESQGs), now often referred to as very small quantity generators (VSQGs), generate 100 kg or less of hazardous waste per month. The question asks about the threshold that triggers the most stringent regulatory requirements for hazardous waste generators in Kansas. This classification is typically the Large Quantity Generator (LQG) status, which is triggered by exceeding the generation thresholds for SQGs. Therefore, generating 1,000 kg or more of hazardous waste per month, or more than 1 kg of acute hazardous waste per month, is the trigger for LQG status.

The Kansas Department of Health and Environment (KDHE) is responsible for administering the state’s hazardous waste program, which is primarily authorized under the Kansas Environmental Management Services Act (KEMSA) and mirrors many aspects of the federal Resource Conservation and Recovery Act (RCRA). K.S.A. 65-3430 et seq. outlines the framework for hazardous waste management in Kansas. When a generator of hazardous waste ceases to operate or transfer ownership of a facility, specific closure and post-closure care requirements apply to ensure long-term environmental protection. These requirements are detailed in regulations promulgated by KDHE, often found in the Kansas Administrative Regulations (K.A.R.) related to hazardous waste. For a facility that has managed hazardous waste, closure involves specific steps to minimize future environmental impact. Post-closure care is a period following closure during which the facility must continue to monitor and maintain the site to prevent releases and protect human health and the environment. The duration of post-closure care is typically specified in the facility’s permit or by regulation, often a minimum of 30 years, but can be extended or reduced based on site-specific conditions and risk assessments. During this period, financial assurance mechanisms are often required to cover the costs of care. The concept of “no further action” is a determination made by the regulatory agency, in this case, KDHE, signifying that the site has met all required cleanup and management standards and no further regulatory oversight is necessary for that specific hazardous waste management unit or the entire facility, provided that the closure and post-closure care obligations have been fully met and documented. This determination is a crucial step in the lifecycle of a hazardous waste facility, indicating the successful completion of regulatory obligations.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body for hazardous waste management in Kansas, operating under the authority granted by the Kansas Hazardous Waste Control Act (K.S.A. 65-3430 et seq.) and the federal Resource Conservation and Recovery Act (RCRA) as implemented in Kansas. Generators of hazardous waste are subject to specific requirements based on the quantity of hazardous waste they produce monthly. These generator categories are crucial for determining the applicable management standards, including storage limitations, contingency planning, and reporting obligations. The tiered system of generator status is designed to match regulatory burden with the potential risk posed by the volume of hazardous waste generated. Small Quantity Generators (SQGs) are those that produce between 100 and 1,000 kilograms of hazardous waste per month. Large Quantity Generators (LQGs) produce more than 1,000 kilograms of hazardous waste per month. Conditionally Exempt Small Quantity Generators (CESQGs), now referred to as Very Small Quantity Generators (VSQGs) under federal revisions adopted by Kansas, generate 100 kilograms or less of hazardous waste per month, or less than 1 kilogram of acutely hazardous waste per month. Understanding these distinctions is fundamental to compliance with Kansas hazardous waste regulations, as each category has distinct operational and record-keeping requirements.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body for hazardous waste management in Kansas, operating under the authority granted by the Kansas Environmental Policy Act and the Hazardous Waste Management Act. These acts empower KDHE to implement regulations that are substantially similar to the federal Resource Conservation and Recovery Act (RCRA) but may include specific state-level nuances or stricter requirements. A generator’s status as a small quantity generator (SQG) or a large quantity generator (LQG) is determined by the amount of hazardous waste they produce per month. SQGs are generally defined as generating between 100 and 1,000 kilograms of hazardous waste per month, or less than 100 kilograms of acutely hazardous waste per month. LQGs generate 1,000 kilograms or more of hazardous waste per month, or more than 100 kilograms of acutely hazardous waste per month. The specific regulatory requirements, such as storage time limits, personnel training, contingency planning, and reporting, vary significantly based on this generator status. For instance, LQGs face more stringent requirements for emergency preparedness and record-keeping compared to SQGs. The question probes the understanding of how generator status, a fundamental classification under hazardous waste regulations in Kansas, dictates the applicable compliance obligations, emphasizing that this classification is not arbitrary but directly linked to the volume and type of hazardous waste generated monthly.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body for hazardous waste management in Kansas, operating under the authority granted by the Kansas Environmental Protection Act and the federal Resource Conservation and Recovery Act (RCRA). Generators of hazardous waste are classified based on the quantity of hazardous waste they produce per month. These classifications determine the specific management standards and requirements that apply. A conditionally exempt small quantity generator (CESQG) is defined as a generator who produces no more than 100 kilograms (approximately 220 pounds) of hazardous waste per month, or no more than 1 kilogram (approximately 2.2 pounds) of acute hazardous waste per month, and no more than 100 kilograms of residue from the cleanup of a spill of acute hazardous waste per month. CESQGs are subject to less stringent management standards compared to small quantity generators (SQGs) and large quantity generators (LQGs). For instance, they can typically accumulate hazardous waste on-site for longer periods without needing a permit, and their record-keeping and reporting requirements are minimal. The classification is crucial for compliance, as exceeding the quantity thresholds for a CESQG without adhering to the more stringent SQG or LQG regulations would constitute a violation of Kansas hazardous waste law. Understanding these thresholds is fundamental to proper hazardous waste management and regulatory compliance within the state of Kansas.

The Kansas Department of Health and Environment (KDHE) oversees hazardous waste management in Kansas under the authority of the Kansas Environmental Management Services Act (K.S.A. Chapter 65, Article 34). This act, along with regulations promulgated under it, establishes the framework for identifying, managing, and disposing of hazardous waste. Specifically, the identification of hazardous waste in Kansas largely mirrors the federal Resource Conservation and Recovery Act (RCRA) program, which is administered by the U.S. Environmental Protection Agency (EPA). Generators of hazardous waste must determine if their waste is hazardous by either characteristic (ignitability, corrosivity, reactivity, toxicity) or by listing. Kansas regulations, found in the Kansas Administrative Regulations (K.A.R.) Article 28, Subpart A, detail these requirements. A facility generating waste that exhibits any of the characteristic hazardous waste properties, as defined by federal criteria which Kansas adopts, is subject to hazardous waste generator requirements. This includes proper storage, labeling, manifesting for transportation, and disposal at a permitted treatment, storage, and disposal facility (TSDF). The K.A.R. 28-31-6, for example, addresses generator standards, including waste determination. Therefore, a waste exhibiting a characteristic of ignitability, corrosivity, reactivity, or toxicity, as defined in the applicable regulations, is considered hazardous waste in Kansas, irrespective of whether it is also listed. The crucial step is the generator’s responsibility to make this determination.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body for hazardous waste management in Kansas, operating under authority granted by both federal and state statutes. The Resource Conservation and Recovery Act (RCRA) provides the federal framework, which Kansas has adopted and often supplemented with its own regulations. Under Kansas Administrative Regulations (K.A.R.) 28-31-1 et seq., generators of hazardous waste are classified based on the quantity of hazardous waste they produce per month. These classifications determine the specific management standards and permitting requirements that apply. Small Quantity Generators (SQGs) are those who generate between 100 and 1,000 kilograms of hazardous waste per month, or less than 1 kilogram of acutely hazardous waste per month. Large Quantity Generators (LQGs) generate 1,000 kilograms or more of hazardous waste per month, or more than 1 kilogram of acutely hazardous waste per month. Conditionally Exempt Small Quantity Generators (CESQGs), now often referred to as Very Small Quantity Generators (VSQGs) under federal revisions that Kansas generally aligns with, generate 100 kilograms or less of hazardous waste per month and less than 1 kilogram of acutely hazardous waste per month. The question asks about a facility that generates 500 kilograms of hazardous waste per month. This quantity falls squarely within the definition of a Small Quantity Generator as per Kansas regulations, which is a critical distinction for determining applicable compliance obligations, such as storage time limits, personnel training, and contingency planning.

The Kansas Department of Health and Environment (KDHE) is responsible for administering the state’s hazardous waste program, which is largely based on the Resource Conservation and Recovery Act (RCRA) as implemented by the state. When a generator of hazardous waste in Kansas ceases to operate, they must properly close their hazardous waste management unit. This closure process involves specific requirements to ensure that any remaining hazardous waste or contaminated materials are managed in a way that protects human health and the environment. The regulations, found within the Kansas Administrative Regulations (K.A.R.) Chapter 28, specifically Article 44, outline these requirements. For a unit that received hazardous waste, closure requires removing all hazardous waste and residues. If removal is not feasible, the unit must be decontaminated to meet specific standards or be managed as a landfill under RCRA Subtitle C. The generator must certify that closure is complete and submit this certification to the KDHE. This certification is a critical step in demonstrating compliance and releasing the generator from future RCRA obligations for that specific unit. The concept of “post-closure care” is typically associated with permitted treatment, storage, and disposal facilities (TSDFs), not necessarily a generator’s closure of a management unit, unless the unit itself requires such care due to its nature and contamination levels, which would be detailed in the closure plan approved by KDHE. However, the fundamental requirement for a ceasing generator is the proper removal or decontamination of waste and residues from their management units.

The Kansas Department of Health and Environment (KDHE) is responsible for the administration and enforcement of hazardous waste regulations in Kansas, which are largely based on the federal Resource Conservation and Recovery Act (RCRA). Under RCRA, generators of hazardous waste are categorized based on the quantity of hazardous waste they produce per month. These categories, often referred to as “generator status,” determine the specific regulatory requirements a facility must follow, including storage time limits, manifest requirements, and emergency preparedness. The three primary categories are conditionally exempt small quantity generators (CESQGs), small quantity generators (SQGs), and large quantity generators (LQGs). A facility that generates more than 1,000 kilograms (kg) of hazardous waste in any single month, or more than 1 kg of acutely hazardous waste in any single month, is classified as a large quantity generator. This classification triggers the most stringent set of regulations, including a 90-day limit for on-site storage of hazardous waste without a permit, detailed personnel training requirements, and a requirement to submit biennial reports to the state environmental agency. The question tests the understanding of these generator categories and the specific threshold that defines a large quantity generator under Kansas hazardous waste regulations, which mirror federal RCRA classifications.

The Kansas Department of Health and Environment (KDHE) administers the state’s hazardous waste program, which is authorized under the Resource Conservation and Recovery Act (RCRA). Under RCRA, generators of hazardous waste are subject to specific management standards based on the quantity of hazardous waste they produce per month. These categories are: Conditionally Exempt Small Quantity Generators (CESQGs), Small Quantity Generators (SQGs), and Large Quantity Generators (LQGs). The threshold for a CESQG is generating 100 kilograms (kg) or less of hazardous waste per month, or 1 kilogram (kg) or less of acute hazardous waste per month. An SQG generates more than 100 kg but less than 1,000 kg of hazardous waste per month, and does not generate more than 1 kg of acute hazardous waste per month. An LQG generates 1,000 kg or more of hazardous waste per month, or generates more than 1 kg of acute hazardous waste per month. The question asks about a facility that *occasionally* exceeds the SQG threshold for non-acute hazardous waste but *never* exceeds the LQG threshold. This scenario describes a generator that falls into the SQG category for most months but temporarily moves into the LQG category due to a temporary increase in production or waste generation. However, RCRA regulations, as implemented in Kansas, focus on the *typical* or *average* monthly generation rate to determine generator status, unless a facility consistently exceeds a higher threshold. The key phrase here is “never exceeds the LQG threshold,” implying that while they might briefly touch the LQG threshold, they do not operate at or above it consistently. Therefore, the generator status remains SQG, with the understanding that if they *consistently* generated 1,000 kg or more per month, they would be reclassified as an LQG. The regulations do not typically allow for a temporary “upgrade” in generator status for a single month if the overall pattern of generation remains below the higher threshold.

The Kansas Department of Health and Environment (KDHE) oversees hazardous waste management in Kansas, largely under the framework established by the Resource Conservation and Recovery Act (RCRA) at the federal level, with specific state-level provisions. When a facility generates hazardous waste, it must determine if it qualifies as a conditionally exempt small quantity generator (CESQG). Kansas regulations, mirroring federal guidelines, define CESQGs based on monthly generation rates. A CESQG is a generator who produces no more than 100 kilograms (approximately 220 pounds) of hazardous waste per month, and no more than 1 kilogram (approximately 2.2 pounds) of acutely hazardous waste per month. Additionally, they must not accumulate more than 1,000 kilograms (approximately 2,200 pounds) of hazardous waste at any given time. These thresholds are critical for determining the generator’s regulatory obligations, including manifest requirements, storage limitations, and reporting. Failure to meet these criteria can result in reclassification to a small quantity generator or a large quantity generator, with significantly increased compliance burdens. Understanding these generation limits is fundamental for any entity managing hazardous waste within Kansas.

The Kansas Department of Health and Environment (KDHE) is responsible for the administration and enforcement of hazardous waste regulations in Kansas, which are largely based on the federal Resource Conservation and Recovery Act (RCRA). Under RCRA, facilities that generate, transport, treat, store, or dispose of hazardous waste are subject to specific requirements. The question concerns a hypothetical situation involving a facility in Kansas that generates hazardous waste. The key concept being tested is the understanding of when a generator’s status changes, specifically from a small quantity generator (SQG) to a large quantity generator (LQG), and the implications of this change regarding regulatory requirements. A generator’s classification is determined by the amount of hazardous waste they accumulate on-site per calendar month. In Kansas, as per 40 CFR Part 262, which is adopted by reference in Kansas Administrative Regulation (KAR) 28-31-100, a large quantity generator (LQG) is a generator who generates more than 1,000 kilograms (kg) of hazardous waste in a calendar month, or more than 1 kilogram (kg) of acute hazardous waste in a calendar month. A small quantity generator (SQG) is a generator who generates more than 100 kg but less than or equal to 1,000 kg of hazardous waste in a calendar month, and less than or equal to 1 kg of acute hazardous waste in a calendar month. In the scenario presented, “Agri-Solutions Inc.” generated 800 kg of hazardous waste in January and 1200 kg in February. For January, the facility met the criteria for an SQG because 800 kg is greater than 100 kg but less than or equal to 1000 kg. However, in February, the generation increased to 1200 kg. This quantity exceeds the 1000 kg threshold for an LQG. Therefore, Agri-Solutions Inc. transitioned from being an SQG to an LQG starting in February. Once a generator becomes an LQG, they must comply with the LQG requirements for that month and subsequent months until they consistently generate less than the LQG threshold. The regulations state that a generator who exceeds the LQG quantity limits for any part of a calendar month is subject to LQG requirements for that month. Consequently, for February, Agri-Solutions Inc. is classified as an LQG. The question asks for the classification in February.

The Kansas Department of Health and Environment (KDHE) administers the state’s hazardous waste program, which is authorized under the Resource Conservation and Recovery Act (RCRA). When a generator of hazardous waste ceases to operate, the KDHE requires that all hazardous waste be properly managed. This includes ensuring that any remaining hazardous waste is either shipped off-site to a permitted treatment, storage, and disposal facility (TSDF) or is treated and disposed of in accordance with applicable regulations. The closure of a facility that generates hazardous waste does not exempt the owner or operator from the responsibility of managing any hazardous waste present at the time of closure. The regulations, specifically those mirroring federal RCRA requirements concerning closure and post-closure care, mandate that all hazardous waste be accounted for and managed appropriately to prevent environmental contamination. Therefore, the responsibility for the proper management of any residual hazardous waste remains with the facility’s owner or operator, even after cessation of operations, until such waste is no longer present or is rendered non-hazardous through compliant treatment. This ensures environmental protection and compliance with Kansas statutes and KDHE regulations.

The Kansas Department of Health and Environment (KDHE) administers the state’s hazardous waste program, which is authorized under the Resource Conservation and Recovery Act (RCRA). Under Kansas Administrative Regulation (KAR) 28-31-10, a generator of hazardous waste is classified based on the amount of hazardous waste generated per month. A small quantity generator (SQG) is defined as a facility that generates more than 100 kilograms but less than 1,000 kilograms of hazardous waste in a calendar month. Facilities generating 1,000 kilograms or more of hazardous waste per calendar month are classified as large quantity generators (LQGs). Facilities that generate 100 kilograms or less of hazardous waste per calendar month are considered conditionally exempt small quantity generators (CESQGs), though this category has been updated under federal RCRA to very small quantity generators (VSQGs). The question specifically asks about a facility exceeding the VSQG threshold but not the LQG threshold. Therefore, the classification would be a small quantity generator. This classification dictates specific requirements for storage, manifesting, record-keeping, and reporting under both federal RCRA and Kansas regulations. Understanding these thresholds is crucial for compliance and avoiding penalties.

The Kansas Department of Health and Environment (KDHE) implements the Resource Conservation and Recovery Act (RCRA) within the state. RCRA establishes a framework for managing hazardous waste from generation to final disposal. A key aspect of this management is the definition of a hazardous waste generator, which is determined by the quantity of hazardous waste produced per month. The regulations categorize generators into three tiers: Very Small Quantity Generators (VSQGs), Small Quantity Generators (SQGs), and Large Quantity Generators (LQGs). VSQGs generate 100 kilograms (kg) or less of hazardous waste per month, or 1 kg or less of acute hazardous waste per month, and less than 100 kg of acute hazardous waste spill residue per month. SQGs generate more than 100 kg but less than 1,000 kg of hazardous waste per month, and less than 1 kg of acute hazardous waste per month. LQGs generate 1,000 kg or more of hazardous waste per month, or 1 kg or more of acute hazardous waste per month. The scenario describes a facility in Kansas that consistently generates 950 kg of hazardous waste per month and 0.5 kg of acute hazardous waste per month. To determine the generator status, we compare these quantities to the regulatory thresholds. Since the facility generates 950 kg of hazardous waste, which is greater than 100 kg but less than 1,000 kg, it meets the criteria for a Small Quantity Generator. Furthermore, the generation of 0.5 kg of acute hazardous waste per month is less than the 1 kg threshold for acute hazardous waste, which does not elevate its status to a Large Quantity Generator based on acute waste alone. Therefore, the facility’s generator status is that of a Small Quantity Generator. This classification dictates specific requirements for storage, record-keeping, reporting, and emergency preparedness, which are less stringent than those for LQGs but more comprehensive than for VSQGs. Understanding these distinctions is crucial for compliance with Kansas hazardous waste regulations.

The Kansas Department of Health and Environment (KDHE) is the primary regulatory body for hazardous waste management in Kansas. Under the Kansas Environmental Management Services Act (K.S.A. 65-3401 et seq.) and the regulations promulgated thereunder, specifically the Kansas Administrative Regulations (K.A.R.) 28-31-1 et seq., KDHE oversees the generation, transportation, treatment, storage, and disposal of hazardous waste. Facilities that treat, store, or dispose of hazardous waste must obtain a permit from KDHE. This permit process involves a thorough review of the facility’s operations, waste streams, and environmental protection measures to ensure compliance with state and federal requirements, including those under the Resource Conservation and Recovery Act (RCRA), which Kansas has authorized to be implemented and enforced. The permit conditions are tailored to the specific facility and the wastes it handles, aiming to protect human health and the environment. This regulatory framework ensures that all hazardous waste activities within Kansas are conducted in a manner that minimizes risks. The question tests the understanding of which state agency holds the primary authority for permitting hazardous waste treatment, storage, and disposal facilities in Kansas and the legal basis for this authority.

The Kansas Department of Health and Environment (KDHE) is the primary state agency responsible for implementing and enforcing hazardous waste regulations under the Resource Conservation and Recovery Act (RCRA) and its state-specific authorizations. When a facility generates hazardous waste, it must determine its generator status based on the quantity of hazardous waste produced per month. This classification dictates the specific management, record-keeping, and reporting requirements. Small Quantity Generators (SQGs) in Kansas are those that produce between 100 and 1,000 kilograms of hazardous waste per month, or less than 1 kilogram of acute hazardous waste per month. Large Quantity Generators (LQGs) generate 1,000 kilograms or more of hazardous waste per month, or more than 1 kilogram of acute hazardous waste per month. Conditionally Exempt Small Quantity Generators (CESQGs), now often referred to as Very Small Quantity Generators (VSQGs), generate 100 kilograms or less of hazardous waste per month. The question asks about the regulatory framework that governs the management of hazardous waste in Kansas, emphasizing the specific requirements for a facility that produces 750 kilograms of hazardous waste monthly. Based on the established thresholds, a facility generating 750 kilograms of hazardous waste per month falls under the Small Quantity Generator (SQG) category. Therefore, the applicable regulations are those specifically designed for SQGs in Kansas, which are derived from federal RCRA requirements as authorized by the state. These regulations involve specific storage time limits, personnel training, contingency planning, and reporting obligations that differ from those for LQGs or VSQGs.

The Kansas Department of Health and Environment (KDHE) is responsible for administering and enforcing the Kansas Hazardous Waste Management Act. This act, along with its corresponding regulations, establishes the framework for managing hazardous waste within the state. When a facility generates hazardous waste, it must determine if it qualifies as a small quantity generator (SQG) or a large quantity generator (LQG) based on its monthly generation rates. These classifications dictate the specific requirements for storage, record-keeping, reporting, and personnel training. A facility that generates more than 1,000 kilograms (approximately 2,200 pounds) of hazardous waste per month, or more than 1 kilogram of acute hazardous waste per month, is classified as an LQG. SQGs have less stringent requirements, typically generating between 100 and 1,000 kilograms of hazardous waste per month. The key distinction lies in the quantity of waste produced and the potential risk it poses. The regulations are designed to ensure that all hazardous waste is managed in a manner that protects human health and the environment, from its generation to its ultimate disposal. Understanding these generator status thresholds is fundamental to compliance with Kansas hazardous waste law.

The Kansas Department of Health and Environment (KDHE) has specific regulations regarding the management of hazardous waste. Under the Kansas Hazardous Waste Management Act, generators of hazardous waste are subject to various requirements, including record-keeping and reporting. A generator is classified based on the quantity of hazardous waste produced per month. Small Quantity Generators (SQGs) are those who produce between 100 and 1,000 kilograms of hazardous waste per month, or less than 1 kilogram of acutely hazardous waste per month. Large Quantity Generators (LQGs) are those who produce more than 1,000 kilograms of hazardous waste per month, or more than 1 kilogram of acutely hazardous waste per month. Conditionally Exempt Small Quantity Generators (CESQGs) produce 100 kilograms or less of hazardous waste per month, and less than 1 kilogram of acutely hazardous waste per month. The question asks about a facility generating 500 kilograms of hazardous waste and 0.5 kilograms of acutely hazardous waste in a calendar month. This quantity of hazardous waste (500 kg) falls within the range for a Small Quantity Generator (100-1,000 kg). The quantity of acutely hazardous waste (0.5 kg) also falls within the CESQG limit for acutely hazardous waste (<1 kg). However, the classification of a generator is determined by the *highest* category for which they meet the criteria. Since the facility generates 500 kg of hazardous waste, it exceeds the CESQG threshold of 100 kg for non-acute hazardous waste. Therefore, the facility is classified as a Small Quantity Generator. This classification dictates the specific management standards and regulatory requirements they must follow under Kansas law, which are more stringent than those for CESQGs but less stringent than those for LQGs. Understanding these thresholds is crucial for compliance and proper hazardous waste management in Kansas.

The Kansas Department of Health and Environment (KDHE) oversees hazardous waste management in Kansas, aligning with the Resource Conservation and Recovery Act (RCRA) at the federal level. Generators of hazardous waste are classified based on the quantity of hazardous waste produced per month. These classifications determine the specific management standards and regulatory requirements they must adhere to. Small Quantity Generators (SQGs) are defined as those who generate between 100 and 1,000 kilograms of hazardous waste per month. Very Small Quantity Generators (VSQGs) generate 100 kilograms or less of hazardous waste per month. Large Quantity Generators (LQGs) are those who generate over 1,000 kilograms of hazardous waste per month. The scenario describes a facility in Kansas that produces approximately 750 kilograms of hazardous waste monthly. This quantity falls squarely within the definition of a Small Quantity Generator under both federal RCRA regulations and Kansas’s adopted hazardous waste program. Therefore, the facility is classified as an SQG, and must comply with the regulations applicable to SQGs, which are less stringent than those for LQGs but more stringent than those for VSQGs. This classification is crucial for determining requirements related to waste accumulation, manifesting, personnel training, and emergency preparedness.

The Kansas Department of Health and Environment (KDHE) administers the state’s hazardous waste program, which is authorized under the Resource Conservation and Recovery Act (RCRA). Facilities that generate, transport, treat, store, or dispose of hazardous waste must comply with specific regulations. A key aspect of this compliance involves determining if a waste is hazardous. This determination is made by either: 1) checking if the waste is specifically listed as hazardous by the EPA or KDHE, or 2) testing the waste to see if it exhibits any hazardous characteristics: ignitability, corrosivity, reactivity, or toxicity. For toxicity, the Toxicity Characteristic Leaching Procedure (TCLP) is used. If a waste exhibits any of these characteristics or is a listed hazardous waste, it is subject to regulation. The question asks about the primary responsibility for hazardous waste management in Kansas. While federal regulations provide a framework, the state agency is the primary enforcer and administrator of the program within Kansas. Therefore, the KDHE holds this primary responsibility for implementing and enforcing hazardous waste regulations in the state, ensuring compliance with both federal and state-specific requirements.